Energy-Efficient Home Improvements

Renovating your home is not just a venture to aesthetically improve and enhance the feature of your house, it is also an excellent way to decrease loss and reduce your power expenses. The energy-efficient renovation will aid to enhance the coziness of your house at the same time aiding to preserving the surrounding. If you are thinking about renovating, it is important you figure out if there are means to enhance your house’s power efficiency. Here are a couple of approaches suggested by that make an impact.

Perform An Audit

When trying to enhance your house’s power efficiency, you need to 1st figure out precisely where your home is exhausting energy. A house energy audit assists owners identify their power usage and how issues may be dealt with. Your regional govt. energy office can aid you to track down a company in your locality or organization that carries out audits. You may also get in touch with your utility provider to check out if they give free or discounted energy audits to their clients.

Check For Air Leaks And Seal them properly

Identifying leaks and plugging them up enables air to slip into and out of your house and increase your energy bills-is the primary step in developing an energy-efficient house. Leaks like these are usually found around windows and doors, but they even may be in your cellar, crawlspaces, or attic.


Putting in insulation to your attic may aid keep your house comfy throughout the year. Stats show that about half of the houses in the USA are under-insulated. Often in the attic spaces, the insulation will decrease down to 3 or 4 inches over a period of years, where you are expected to have at least 12 inches of insulation (relying on the kind of insulation).

Seal Ducts

In forced-air heating and cooling systems, ducts carry hot or cold air to various parts of the house. The Ecological Protection Agency approximates that about a 5th of this air gets away as a result of leaks. To deal with this pricey problem, customers ought to fix leaks in exposed ducts, for example, those located in the attic and basement. Aside from sealing leaks, it is also suggested that property owners insulate their ducts.

Switch out old windows

Switching out old, leaky windows with higher-efficiency models can save in the long run. There are lots of energy-saving alternatives available. Ensure that any new windows are double-paned and glazed. Energy-efficient low-e (low emissive) and spectrally-selective coatings block out UV rays while still permitting light and heat to travel through; storm windows and solar shades can assist to safeguard your house from solar heat gain. Adding more windows in particular places is another option. This method offers a way to grab natural sunlight and heat throughout colder months.

Switch out dated heating and air conditioning units

Older, inept heaters and air conditioners utilize more energy since they need to work harder to heat and cool. Switching out an outdated HVAC system with a more energy-efficient one can reduce your month-to-month power costs.

Switch out your energy-zapping water heater

High-efficiency water heaters can drive down house energy costs. Water heating makes up anywhere from 15 to 25 percent of the yearly energy usage in a house. High-efficiency water heaters save energy by keeping water hot longer than conventional water heaters.


The real energy savers in kitchen remodel are the appliances you select. Qualified ENERGY STAR products can reduce your electricity bill by 40 percent because they utilize less power and water. On top of that, if you switch out your gas or electric stove with an induction range that makes use of a small amount of concentrated heat, you will utilize less energy while you cook.


As you switch out showerheads and faucets, think about low-flow items that deliver water pressure that is similar to traditional products while considerably reducing water usage. Think about setting up high-efficiency and dual-flush toilets that use roughly 1.28 to 1.6 gallons of water per flush.

Energy-Efficient Home Improvements Light the Way to Real Estate Success

How to Hang Outdoor String Lights on Stucco

How to Hang Outdoor String Lights on StuccoHanging lights outdoors is a time-honored holiday tradition. However, stucco surfaces can make the job difficult at times. Fortunately, you can hang your Christmas, Halloween or other decorative lights quickly and easily by following a few simple steps. The bistro light installation Scottsdale AZ experts share how to hang outdoor string lights on stucco below.

Using Clips to Hang String Lights on Stucco

How to Hang Outdoor String Lights on Stucco

To hang string lights on stucco using clips, follow these steps:

  1. Gather Supplies

There are a handful of supplies you will need for this project. They include lights, light clips, a ladder, an extension cord, and a glue gun or outdoor adhesive.

  1. Measure the Area

After you’ve rounded up your supplies, you’ll want to measure the area in which you wish to hang the lights. This can include window frames, a porch overhang or the house’s roof line. Heading to the store with measurements in hand will give you a better idea of how many lights and clips you will need.

  1. Purchase Lights and Clips

Use the measurements you took earlier to purchase enough lights to cover the area. If you are planning on using different colors throughout your design, be sure to cut the number of a single color of lights you buy in half. Next, pick up enough clips to hang your lights. Depending on the type of lights you buy, you’ll want a clip to hang every 6 to 8 inches. The size of the clips will also vary depending on the size of light bulbs you are using.

  1. Secure the Clips

How to Hang Outdoor String Lights on StuccoThe next step in hanging the string lights is to install and secure the clips. You can secure them using a hot glue gun or some other adhesive. Be sure to give the clips enough time to dry or cure. While they do, you can test your string lights to ensure all the bulbs are working properly. You should also have plenty of time to replace any busted or missing bulbs while the clips dry.

Keep in mind that while the clips are reusable, they won’t be easy to remove. Consider using smaller clips that you can conceal when not using lights during other times of the year. On some softer surfaces you can use smaller hooks that you can easily screw and unscrew.

  1. Hang the Lights

Now that the clips have dried, it’s time to hang the lights. Simply arrange the lights along the line of clips by inserting the cord into each clip. Continue the process until each clip has been used. Finally, plug in the lights, sit back and enjoy your display!